Backup Exec Server Service Fails to Start with Error 1053 / 0x0000041D

book

Article ID: 100076835

calendar_today

Updated On:

Description

Windows Services Console GUI Pop-up

Windows could not start the Backup Exec Server service on Local Computer.  
Error 1053: The service did not respond to the start or control request in a timely fashion.  

image.png

 

Backup Exec Services Manager Pop-up

image.png

 

Windows Event Viewer System Event Log:

-----------------------------------------------
Log Name:      System
Event ID:      7000
Task Category: None
Level:         Error
Keywords:      Classic

Description:
The Backup Exec Server service failed to start due to the following error: 
The operation completed successfully. (0x0000041D)

-----------------------------------------------

Log Name:      System
Source:        Service Control Manager
Event ID:      7009
Task Category: None
Level:         Error
Keywords:      Classic

Description:
A timeout was reached (180000 milliseconds) while waiting for the Backup Exec Server service to connect.

-----------------------------------------------

Log Name:      System
Source:        Service Control Manager
Event ID:      7009
Task Category: None
Level:         Error
Keywords:      Classic

Description:
A timeout was reached (180000 milliseconds) while waiting for the Backup Exec Server service to connect.

-----------------------------------------------

Log Name: System
Source: Service Control Manager
Event ID: 1068
Level: Error
Keywords: Classic

Description: The Backup Exec Server service depends on the following service: [Name of Dependent Service, e.g., Backup Exec Device and Media Service or SQL Server (BKUPEXEC)]. This service might not have been installed.
(Or alternatively):
The dependency service or group failed to start.

-----------------------------------------------

Error 1053 ("The service did not respond to the start or control request in a timely fashion")

Log Name: System
Source: Service Control Manager
Event ID: 7000 (Note: Event ID 7009 may also be logged alongside this to explicitly state the 30000 millisecond timeout)
Level: Error
Keywords: Classic

Description: The Backup Exec Error Recording Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

 

 

Cause

This issue can occur when core Backup Exec binaries, COM+ components, dynamic-link libraries (.dll files), or registry hooks become missing, mismatched, or corrupted following an abrupt shutdown, failed patch update, or anti-malware interference. Recent Windows Update .NET framework issue.

As a result, the Service Control Manager (SCM) issues a start command to beserver.exe, but the service cannot complete its initialization handshake within the allocated timeout window.

Resolution

To restore corrupted or missing core service components and re-register the Backup Exec binaries, perform a Repair installation using the Backup Exec installation media.

Mount the Backup Exec ISO file corresponding to your currently installed version, or extract the installation media archive to a local drive.

Note: Unblock the Installation Media.
After downloading or copying the Backup Exec install ZIP or ISO to the server, you must unblock the file. Right-click the ZIP or ISO file, select Properties, check the Unblock box at the bottom of the General tab, and click Apply then OK.

 

Open the mounted/extracted media directory.

Locate and right-click browser.exe, then select Run as administrator.
On the Backup Exec Installation browser screen, navigate to the installation options.


When prompted with setup options, select Repair.

Follow the on-screen wizard prompts to proceed with the repair operation.
Once the repair completes successfully, reboot the server if prompted.

Open the Backup Exec Services Manager or Windows Services console (services.msc).
Verify that the Backup Exec Server service and all dependent Backup Exec services start and remain in a Running state.

 

Issue/Introduction

When attempting to start the Backup Exec Server service (Backup Exec Service / beserver.exe) via the Windows Services console (services.msc) or the Backup Exec Services Manager, the service fails to start and times out.

Other Backup Exec related services may report the same error when attempting to start.

Additional Information

If issue still persists, reach out Backup Exec Technical Support using https://supportbackupexec.cloud.com/support-home/home