CAUSE |
STEPS TO RESOLVE |
| 1. Contaminated read/write heads of the tape device: | Check with the hardware manufacturer for proper cleaning techniques. |
| 2. Bad media: |
Replace the media. Try a new tape that is certified by the hardware manufacturer.
Additionally, the tape may be erased using "NoPoll" with NTBackup utility. Refer to related documents. |
| 3. Tape driver: | Load the appropriate Backup Exec tape driver. The latest Backup Exec tape drivers can be downloaded from the Veritas Technical Support Web site at https://www.veritas.com/support/en_US.html . |
| 4. General SCSI problems: | Isolate the tape drive on its own controller card. |
| 5) Check if there is any Hardware Related Error in the Event logs | Contact Hardware Vendor |