"Error : Insufficient disk space. Connection to the restore target has been lost. Operation canceled." when restoring data to an NTFS partition\drive.
Article ID: 100016692
Updated On:
Description
Error Message
Final error: 0xe000848f - Insufficient disk space.
Final error category: Resource Errors
For additional information regarding this error refer to link V-79-57344-33935
Cause
This error may occur if the Disk Quotas are enabled and limit is set to something less than the actual data size to be restored.
Resolution
1. Uncheck "Enable Disk Quota"
2. Select the option "Do not limit disk usage"
3. Set the limit disk space higher than the size of data to be restored.
In addition to Disk Quotas, the error can occur if corrupt data is encountered during the restore. The corruption could also be due to file compression or encryption algorithms that the file system cannot convert. In order to determine the actual file or directory that is causing the issue, the detail level of the job log can be increased to see the point of failure. In addition, the SGMON.EXE utility can debug the restore job and pinpoint the point of failure.
2. Select the option "Do not limit disk usage"
3. Set the limit disk space higher than the size of data to be restored.
In addition to Disk Quotas, the error can occur if corrupt data is encountered during the restore. The corruption could also be due to file compression or encryption algorithms that the file system cannot convert. In order to determine the actual file or directory that is causing the issue, the detail level of the job log can be increased to see the point of failure. In addition, the SGMON.EXE utility can debug the restore job and pinpoint the point of failure.
Issue/Introduction
"Error : Insufficient disk space. Connection to the restore target has been lost. Operation canceled." when restoring data to an NTFS partition\drive.
Was this article helpful?
Yes
No
Powered by
